Search results

  1. K

    Warrior front end/Streetfox rear end combination - where to start?

    Thanks, I was hoping to get away with some minor tinkering and adding the two frameparts. It seems like I have to do some more serious thinking and drawing to get the angles right. As the projected result I have the warrior front, low but not to low (no bottoming out on bad French roads, even...
  2. K

    Warrior front end/Streetfox rear end combination - where to start?

    This is indeed my line of thinking, with the build of a mock-up as an added bonus, as Brad replied. One question, only the handlebars should be place further forward or the USS fork as well? I would expect the latter. Not only because of weight (more material) but also the 'swing' of the...
  3. K

    Warrior front end/Streetfox rear end combination - where to start?

    Thanks Brad, building a mock-up is probably necessary to get the right distance on the key points where my warrior is sub-optimal.
  4. K

    Warrior front end/Streetfox rear end combination - where to start?

    Dear members of my knowledgebase, Earlier this year I have completed my warrior trike (and using it). Now it is time to build another tadpole, this time a warrior/streetfox combo, with the warrior frontend. During the first build I discovered that the plans are not totally in sync with my body...
  5. K

    Warrior build - work in progress and questions

    Again, thanks a lot! There was a loose screw, it's fixed now. Then the shifter cable became loose, is now tightened. And changed the rear gears from the hill-set to the flat-land set (11-24 instead of 11-36). So all in all this is pretty much done.
  6. K

    Warrior build - work in progress and questions

    Thank you gentlemen, I will have a look into it and try to fix it. It used to work before I stripped and painted the whole contraption :unsure:
  7. K

    New Forum Online!

    Nice work Brad, thanks!
  8. K

    Warrior build - work in progress and questions

    HI all, now the weather is getting better I am working on the trike to get it moving to my likings. Unfortunately I have discovered that shifting on the rear gears is near to impossible (as in, 3 of positions are available, for the rest the rear-derailleur doesn't get it). Probably this has...
  9. K

    Warrior build - work in progress and questions

    Hi, I am building a warrior, but instead of following the drawing I am using an 28" rear wheel. And this seems to initiate a bit of a problem. I hope some of you can give me directions to solve this in the easy way. As you can see in the picture I have created some sort of jig to create the...
  10. K

    28"(or 700c) rear wheel in Warrior?

    A good evening to all of you! May I ask a few questions? I am in the process of gathering the base material for the build of a Warrior trike. Since I have a roadbike spare (and ready to cut) as well as two wheel sets, all 28"or 700c, I was wondering, has anybody built a Warrior with a 28"rear...
Click for DIY Plans!
Back
Top